Default Login For: WCR-300S
IP Address: 192.168.11.1Login
Default logins for WCR-300S
How to login to the buffalo WCR-300S
- Open your web browser (e.g. Chrome, Firefox, Opera, or any other browser)
- Connect your PC or Laptop via cable to your router. Or instead, use your wireless network. Suggestion - It is recommended for the connection be done by using a cable attached to the buffalo WCR-300S router. That will prevent you from losing connection in the middle of the configuration/setup process.
- You should see 2 text fields where you can enter a username and a password. The default username for your buffalo WCR-300S is admin.
- The default password is (blank).
- Enter the username & password, hit "Enter" and now you should see the control panel of your router.
How to update the buffalo - WCR-300S router
There are two ways to update firmware of your router.
- 1. By going to the official site of your router.
- 2. By entering into the admin page.
- To update the router using the first way you will have to visit the official site of your router. Then you will have to look for the new update of your model. If you find the new update on the site then install it and if you don’t then the new update isn’t available for your model.
- If you want to update your router using the second way then you will have to visit the administrative page. After entering the administrative page you will have to search the option for updating your router and install the new update.
buffalo WCR-300S Routers Support
If you experience problems logging in a [Model Name] router, then you are probably using the wrong username or password. Do not forget to store the login details after you have reset them.
Forgot Login Password? Try the hard reset function. In order to do this, press and hold the small black button usually situated at the back your router case for approximately 10 seconds.
In many cases problems related to loading the login screen of the router are related to it having a different IP from the one tried to be loaded. In this case, your network is most certainly using a different IP address. If that is the case, review our IP address router list, and find the right address.
Doing so will reset your router to the factory settings. Router login page not loading? If for some reason the admin webpage fails to load, then check if the device you are using is connected to the wi-fi. You can also lookup what exact IP address has been set as default for the router.