Guide to set up your new TP-Link Router – 192.168.0.1

You can easily set up your new WP-Link Wi-Fi router and will be able to use it. If you have bought a new TP-Link Router, then configuring the router and setting it up is really easy.

Note: To connect to the internet, the router must be connected to an active modem or data jack.

Follow this guide to set up your new TP-Link Router –

  1. Check the power on the router and connect your PC to the router using an Ethernet cable.
  2. Once connected successfully, open a web browser and head over to 192.168.0.1 or tplinkwifi.net.
  3. Set your router login password by entering it twice. It is preferred to keep it simple – “admin“.
  4. Click on Let’s Get Started/Login.
  5. Now, follow the on-screen instructions and configure your Internet and Wireless Network using the Quick Setup option.
  6. Enter the name (SSID) for your Wireless Network in the given field and also, set a password to secure your Wi-Fi network.
  7. Now, you can finish the process, after which you will be able to join the Wireless Connection with the SSID using your password.

 

How to change the TP-Link Login password?

Your Admin Panel holds the key to all the settings of your router and it is important that you change the login password of your Admin Panel, otherwise, anyone connected to your network can change the login password and mess up the settings of your Router and you will have to reset your router to factory defaults. To avoid all this, here is how you can change your TP-Link Login Password:

  1. Log in to the Admin Panel of your TP-Link Router.
  2. Once logged in, go to Management->Access Control->Password.
  3. There, enter your old password and then enter your new password & re-enter it again for verification.
  4. Click on Save/Apply to save the changes.

 

How to change the password of the TP-Link WiFi Network?

Changing the password of the TP-Link WiFi network is important because any new router that you buy uses the default credentials for your WiFi including default WiFi SSID and Password. So you should change the password of your WiFi network to keep it secure.

Here is how you can change the password of your TP-Link WiFi network:

  1. Log in to the Admin Panel of your TP-Link Router.
  2. Once logged in, go to Wireless ->Wireless Security.
  3. Scroll down to the WPA-PSK/WPA2-PSK section.
  4. In the PSK Password field, type your new Wi-FI Password. (8-63 characters, including alphabets, digits, and special symbols)
  5. Now, click on Save to save the changes and reboot your router.